2022 High quality Power Point To Odf - Fiber Optic Distribution Frame (ODF/MODF) – Qianhong

Features

High quality cold rolled sheet forming, electrostatic powder spraying technology, smooth surface, not east to rust.

High strength sheet metal, long-term using is not easy to deformation.

The edges of metal parts are designed with rounded corners to avoid damage to cables.

The bottom plate is designed with sliding design, for the patch panel already installed on the cabinet, the wiring can be adjusted without removing the patch panel.

Installation instruction

• Preparation before installation
A. Check the structure and type of fiber cables before installation; different fiber cables could not be spliced
together;
B. Seal well the connective components to reduce additional loss to fibers caused by dampness; don’t apply
any pressure on the connective components;
C. Keep a dry and dustless working environment; don’t apply any external force to the cables; don’t bend or
entwine cables;
D. Appropriate tools should be used for splice of cables according to the local standards during the whole
installation process.

• The installation procedure of the box
A. Open the front cover of the box or the top (if necessary), take down the fiber splice tray; let in the fibers
from the fiber entry and fix them on the box; the devices for fixation are as follows: the adjustable collet,stainless fiber cable ring & nylon tie;
B. The fixation of steel core (if necessary): thread the steel core through the fixed device (optional) and screw
down the bolt;
C. Leave about 500mm-800mm long spare fibers from the peeled point of fiber cable to the entrance of the
splice tray, cover it with plastic protective tube, fix it with plastic tie at the T type holes; splice fibers as
usual;
D. Store the spare fibers and pigtails, plug the adapters in the slots on the tray; or first plug in the adapters and
then store the spare fibers, please pay attention to the direction of coiling fibers
E. Cover the splice tray, push in the splice tray or fix it with the slot at the edge of the box;
F. Install the box inside 19” standard mounting equipment.
G. Connect the patch cord as usual.

FAQ

1.Who are we?

We are based in Chengdu, China, start from 1995, sell to North America(45.00%),Western Europe(26.00%),Southeast Asia(13.00%),Mid East(5.00%),Oceania(5.00%),Eastern Asia(4.00%),South America(2.00%). There are total about 101-200 people in our office.

2. How can we guarantee quality?

Always a pre-production sample before mass production; Always final Inspection before shipment;

3.What can you buy from us?
 
Fiber optic patch cord,fiber optic patch panel,fiber enclosures,fiber patch panel,fiber optic jumper.
4. Why should you buy from us not from other suppliers?
 20 years on communication industry Competitive price Fast delivery 24 hours service OEM ODM Free samples.
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,Express Delivery；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T; Language Spoken:English,Chinese,Japanese.

Order Guidance

Exterior Structure Diagram

Technical Parameter

1. Working Temperature: -40 degrees centigrade~+65 degrees centigrade
2. Atmospheric Pressure: 62~106Kpa
3. Axial Tension: >1000N/1min
4. Flatten Resistance: 2000N/100 mm (1min)
5. Insulation resistance: >2*104MΩ
6. Voltage Strength: 15KV(DC)/1min, no arc over or breakdown
7. Temperature recycle: under -40℃~+65℃，with 60(+5)Kpa inner pressure, in 10cycles; Inner pressure shall decrease less than 5 Kpa when closure turn to normal temperature.
8. Durability：25 years

Main Components

Name	Qty	Picture		Name		Qty		Picture
Dome	1pc			Tray		Max.4 pcsoptional		RQP-06-24c middle splice
								RQP-08-24c side splice
Clamp	1pc			Valve		1		optional
Base	1pc			Modified O-ring		1
Cable Strengthen member attach plate	1set			Velcro strip with one X flake		1
optic joints protection tube	Max. 96			Ground feed-through lug		1	optional
Metal Storage basket	1 standard offered			Plastic storage basket		1Orderd as optional
Nylon tie &  Transparent PE tube	8pcs/bag	Each two trays with 1 bag.
Wall mounting kits	1Standard offered with
Aerial mounting kits	Order as optional
Pole mounting kits	Order as optional
Round Port accessories bag	1 bag		Items		Heat-shrink tube		4
					Abrasive tape		1
					Aluminium foil		4
Oval port accessories bag	1bag		Items		Heat-shrink tube		1
					Abrasive tape		1
					Aluminium foil		2
					Cleaning tissue		1		optional
					Desiccant		1		optional
					Shield continuity wire		1		optional
					AMP clamp		1		optional
					Branch off clip		1

Installation Guidance